 |
 |
Application instructions:
- Fill nail holes with Fix Wood Patch. Do not use plastic wood.
- Sand specific areas with 120 sandpaper to clear blemishes.
- After taking care of holes and blemishes, sand the entire piece uniformly with 180-grade sandpaper. Finer sandpaper or steel wool should not be used as they polish the surface off too smoothly.
- Remove dust with a vacuum and tack cloth.
- Since this product is a gel, it does not needed to be stirred, as the color will not separate.
- Test the color on a concealed area that has been prepared as directed to check that you have selected the proper color.
- Apply the stain with a lint-free soft cloth or a brush in a circular motion, one section at a time.
- Allow the stain to sit approximately one minute without allowing it to dry, and wipe off with a soft cloth.
- Repeat steps eight and nine to each section of the piece.
- One coat of this Mastercraft stains is generally sufficient, but, if you desire a darker tone, wait at least four hours until the first coat has dried and apply a second coat.
- Apply the final coat of stain to dry 12 to 24 hours before applying the top coat of your choice.